Square Washers
Square washers that spread load over timber, channels and structural sections.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 436
View ProductMachined Washers
Flat washers turned to drawing for non-standard diameters, thicknesses and tolerances.
Product Overview
Flat washers turned to drawing for non-standard diameters, thicknesses and tolerances.
Washers distribute bolt load over a larger bearing area, protect surfaces, bridge oversize holes or provide spring or locking action under vibration. Selection depends on joint hardness, hole type and service environment.
- Load distribution and surface protection
- Locking and spring take-up options
- Custom outer diameter, thickness and hole size on request
Technical Specifications
| Product Name | Machined Washers |
| Product Type | Washers |
| Material | Stainless steel, carbon steel, alloy steel, duplex, super duplex, nickel alloys, brass, titanium, high tensile (subject to enquiry) |
| Grade | 304, 316, 410, spring steel |
| Size Range | Available as per customer specification |
| Head / Drive | Flat, CNC turned |
| Thread Type | Not applicable (unthreaded) |
| Manufacturing / Dimensional Standard | ASME B18.22.1, DIN 125, ISO 7089, customer drawing (applicable standard confirmed against your order) |
| Finish / Coating | Plain, zinc plated, hot dip galvanized, black oxide, passivated, electro galvanized, nickel plated, or customer specified |
| Mechanical Properties | Per material grade and standard; see table below |
| Testing / Inspection | Dimensional, visual, thread, mechanical and chemical checks as agreed with the order |
| Certification | Material Test Certificate on request; EN 10204 3.1 where requested |
Standards
Standards commonly associated with Machined Washers: ASME B18.22.1, DIN 125, ISO 7089, customer drawing. The governing standard is confirmed against your purchase specification; not every standard is stocked or supplied in every size or grade.
Dimensions
Dimensions are manufactured according to the applicable dimensional standard and customer requirements. Share your drawing or size list for confirmation.
Materials and Grades
| Material | Typical grades | Standards |
|---|---|---|
| Stainless Steel | 304, 304L, 316, 316L, 321 | ASTM F593, F594, A193 B8/B8M/B6, A194 Gr 8/8M, A276, ISO 3506-1/-2 |
| Carbon Steel | Class 4.6, ASTM A307 Gr A / B, Class 8.8 / SAE Gr 5 | ASTM A307, A563, ISO 898-1/-2, SAE J429, DIN/ISO dimensional standards |
| Alloy Steel | B7, B16, L7, 4340, A354 BD | ASTM A193 B7/B7M/B16, A194 2H/4, A320 L7, A354 BD, A574, ISO 898-1 10.9/12.9 |
| Duplex Steel | S31803 / S32205, S32304 | ASTM A276, A479, A182 F51/F60, NACE MR0175 / ISO 15156 where specified |
| Super Duplex Steel | S32750, S32760, S32550 | ASTM A276, A479, A182 F53/F55, NACE MR0175 / ISO 15156 where specified |
| Nickel Alloys | Alloy 600 (N06600), Alloy 625 (N06625), Alloy 718 (N07718), Alloy 825 (N08825), Monel 400 (N04400) | ASTM B166, B446, B637, B425, B164, B865, B574, F467/F468 |
| Brass | C26000, C28000, C36000, C46400 | ASTM B16, B21, B134, F467/F468, DIN/ISO dimensional standards |
| Titanium | Grade 1, Grade 2, Grade 5, Grade 9, Grade 12 | ASTM B348, B381, F467/F468, ASME SB-348 |
| High Tensile | Class 8.8, Class 10.9, Class 12.9, SAE Gr 5 / Gr 8 | ISO 898-1/-2, ASTM A193 B7, A354 BD, A325, A490, SAE J429 Gr 5/8 |
General industry information. Availability of a given grade is confirmed at enquiry stage. See individual material pages.
Mechanical Properties
Mechanical properties depend on the material grade, heat treatment and the drawing or standard specified. State the required properties in your enquiry.
Surface Finishes
| Finish | Notes |
|---|---|
| Plain | Uncoated; typical for stainless steel and non-ferrous |
| Zinc Plated / Electro Galvanized | Thin zinc layer for indoor and mild environments |
| Hot Dip Galvanized | Thick zinc coating for outdoor and structural use; allowances needed on mating threads |
| Black Oxide | Mild corrosion resistance with oil, low reflectivity |
| Passivated | Removes free iron from stainless steel to restore the passive film |
| Nickel Plated | Corrosion and wear resistance, appearance |
| Customer specified | Other coatings on request |
Manufacturing Process
Typical process route for this product type (general information; actual route depends on size, material and order):
- Strip, plate or bar selection
- Blanking, stamping or CNC machining
- Coiling and cutting (spring types)
- Heat treatment where required
- Deburring
- Surface treatment
- Inspection and testing
- Marking and packing
Inspection and Testing
- Dimensional inspection against drawing or standard
- Visual and surface inspection
- Thread inspection with go / no-go gauges
- Chemical composition verification and PMI where applicable
- Mechanical testing: tensile, proof load, hardness
- Coating thickness inspection where coated
- Material Test Certificate; EN 10204 3.1 where requested
See the Quality page. Documentation scope is agreed at the quotation stage.
Applications and Industries
Oil & GasPower GenerationConstructionHeavy EngineeringMachineryFabricationIndustrial Equipment
Packaging
- Cartons or wooden boxes on pallets, selected for weight and destination
- Seaworthy export packing, with corrosion protection where required
- Marking with grade, size and heat or batch number as per order
Customization
Machined Washers can be quoted to your drawing, sample or specification, including non-standard sizes, lengths, threads, materials and finishes. Send details through the enquiry form.
Frequently Asked Questions
What materials are available for Machined Washers?
Machined Washers can be quoted in stainless steel, carbon steel, alloy steel, duplex, super duplex, nickel alloys, brass, titanium and high tensile grades, subject to size and standard.
Which standards can be supplied?
Typical references are ASME B18.22.1, DIN 125, ISO 7089, customer drawing. The governing standard is confirmed against your specification.
What sizes are available?
Size range depends on product, material and standard. Share diameter, length and quantity for confirmation.
Can custom dimensions be manufactured?
Yes, to customer drawing or specification, subject to technical review.
What surface finishes are available?
Plain, zinc plated, hot dip galvanized, black oxide, passivated, electro galvanized, nickel plated or customer specified finishes.
Can material test certificates be supplied?
Material Test Certificates, including EN 10204 3.1 where requested, can be requested with the order. Scope is agreed at quotation.
Related Products
Dome Washers
Domed washers used where a rounded finish, cover or load-spreading profile is needed.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View Product
Hex Bolts
Hexagon head bolts and cap screws, fully or partially threaded, for general bolted joints in structures, machinery and pressure equipment.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.2.1
View Product
Hex Nuts
Hexagon nuts in standard and heavy series for general and pressure bolting.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.2.2
View Product
Socket Head Cap Screws
High-strength cap screws with an internal hex drive for compact, high-preload assemblies.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.3
View Product