Hex Bolts
Hexagon head bolts and cap screws, fully or partially threaded, for general bolted joints in structures, machinery and pressure equipment.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.2.1
View ProductIndustrial Fasteners
Bolts, nuts, screws, washers, studs and special fasteners in a full range of materials.
37 products
Bolts
Hex, flange, structural, anchor and specialty bolts for bolted joints in steel structures, machinery and pressure equipment.
Flange Bolts
Hex head bolts with an integral washer-faced flange that spreads load and removes the need for a separate washer.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 6921
View Product
U Bolts
U-shaped bolts threaded on both legs for clamping pipes, tubes and round sections, and for leaf spring mounting.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 3570
View Product
Shoulder Bolts
Precision ground shoulder bolts providing a bearing or pivot surface with a reduced threaded section.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.3
View Product
Eye Bolts
Eye bolts with a closed eye and threaded shank for lifting, rigging and anchoring.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 580
View Product
12 Point Flange Bolts
Bolts with a 12-point flanged head for high torque in confined spaces, common in engine and automotive assemblies.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ISO 898-1 (properties)
View Product
Stove Bolts
Fully threaded, slotted round or flat head bolts used with square or hex nuts in light fabrication and sheet metal assembly.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASTM F593
View Product
J Bolts
J-shaped bolts with a hooked end that embeds in concrete or hooks onto a structural member.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASTM F1554
View Product
Anchor Bolts
Anchor bolts that secure steel columns, equipment and machinery bases to concrete foundations.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASTM F1554 Gr 36/55/105
View Product
T Bolts
T-head bolts that slide into T-slots or channels for adjustable clamping and machine fixtures.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 186
View Product
Structural Bolts
Heavy hex bolts for steel-to-steel structural connections, supplied with matching nuts and hardened washers.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASTM F3125 (A325/A490)
View Product
Tensile Indicating Bolts
Bolts or bolt assemblies that give a visible or measurable indication that the required preload has been reached.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASTM F3125 Gr F1852/F2280
View Product
Hot Dip Galvanized Bolts
Bolts coated by hot dip zinc immersion for long-term outdoor and structural corrosion protection.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASTM A153
View ProductNuts
Hex, flange, square, T-slot, nylon-insert and all-metal lock nuts matched to bolt property classes.
Hex Nuts
Hexagon nuts in standard and heavy series for general and pressure bolting.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.2.2
View Product
Flange Nuts
Hex nuts with an integral bearing flange, optionally serrated, that spread load and resist loosening.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 6923
View Product
Square Nuts
Square nuts for T-slots, channels and applications needing wrench-resistant seating.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 557
View Product
T Nuts
T-slot nuts for aluminium profile, machine tables and fixture systems.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 508
View Product
Nylock Nuts
Prevailing torque nuts with a nylon insert that grips the bolt thread to resist vibration loosening.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 985
View Product
Lock Nuts
All-metal prevailing torque nuts for higher temperature use where non-metallic inserts are unsuitable.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 980
View ProductScrews
Cap screws, socket head screws, self tapping, machine and countersunk screws for assemblies and equipment.
Hex Head Cap Screws
Fully threaded hex head screws for tapped holes and through-bolted joints.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.2.1
View Product
Socket Head Cap Screws
High-strength cap screws with an internal hex drive for compact, high-preload assemblies.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.3
View Product
Self Tapping Screws
Screws that form or cut their own thread in sheet metal, plastics or thin sections.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.6.4
View Product
Machine Screws
Small fully threaded screws for tapped holes and nuts in equipment and electrical assemblies.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.6.3
View Product
Countersunk Screws
Flat-head screws that seat flush with the surface in countersunk holes.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 7991
View ProductWashers
Spring, machined, square and dome washers for load distribution and locking.
Spring Washers
Helical split washers that provide spring take-up and resistance to loosening under vibration.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 127 B
View Product
Machined Washers
Flat washers turned to drawing for non-standard diameters, thicknesses and tolerances.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASME B18.22.1
View Product
Square Washers
Square washers that spread load over timber, channels and structural sections.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 436
View Product
Dome Washers
Domed washers used where a rounded finish, cover or load-spreading profile is needed.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View ProductStuds
Fully threaded and double-ended stud bolts for flanged, pressure and heavy engineering joints.
Stud Bolts
Double-ended and fully threaded studs for flanged joints, pressure vessels and heavy equipment.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
ASTM A193 B7/B7M/B16/B8/B8M
View ProductSpecial Fasteners
Drawing-based special bolts, rivets, plugs, pins and turned components.
Special "T" Head Bolt
T-head bolts with non-standard head, neck or shank geometry made to drawing.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View Product
Special Rivet
Rivets with non-standard head and shank dimensions for permanent joints.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View Product
Special Bolt
Bolts with a custom head, shank or thread form not covered by catalogue standards.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing or sample
View Product
Pressure Nozzle
Turned nozzles with threaded connections for pressure and fluid service.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View Product
Hex Socket Plug
Threaded plugs with an internal hex drive for sealing ports and bores.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
DIN 908
View Product
Double "D" Head Collar Sleeve
Turned sleeves with a double-D head and collar for anti-rotation positioning.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View Product
Special "T" Bolt
T-shaped bolts with custom dimensions for fixtures and clamping.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View Product
Ball Pin
Pins with a spherical end for pivots and ball-joint style connections.
Materials: stainless, carbon, alloy steel and more, subject to enquiry
Customer drawing
View Product